As a widely used device in the field of industrial and civil water treatment, the performance of the स्प्लिट केस डबल सक्शन पंप is directly related to the efficiency and economy of the system. By deeply interpreting these performance curves, users can make appropriate choices to ensure the efficient and reliable operation of the pump.

The performance curve of the pump usually contains several key parameters to help users understand the operation of the pump and choose the right pump. Based on the diagram you provided, we can interpret some of the main parameters and curve meanings:

1. X-axis (flow rate Q)

Flow rate (Q): The horizontal axis of the graph represents the flow rate in m³/h. Generally speaking, the larger the flow rate, the greater the output capacity of the pump. Usually this axis increases from left to right.



2. Y-axis (head H)

Head (H): The vertical axis of the graph represents the head in meters (m). The head indicates the height to which the pump can lift the liquid, which is an important indicator to measure the pump capacity.

3. Equi-head lines

Equi-head lines: The curved lines in the figure are the equal-head lines, each of which marks a specific head value (such as 20m, 50m, etc.). These lines represent the head that the pump can provide at different flow rates.

4. Efficiency curves

Efficiency curves: Although each efficiency curve is not specifically shown in this figure, in a typical performance curve graph, there is usually a curve (η) used to show the pump efficiency. These curves show the operating efficiency of the pump at the corresponding flow rate, usually expressed as a percentage. Some graphs use different colors or line types to distinguish.

5. Operating range

Operating range: By observing the equal-head lines in the graph, the effective operating range of the स्प्लिट केस डबल सक्शन पंप can be determined. Ideally, the operating point (the intersection of flow and head) should be between the head lines and as close to the highest point (BEP) of the efficiency line as possible.

6. Horsepower and power

Power requirements: Although this graph focuses on information about flow and head, in actual applications, the power curve can also be used to understand the input power required to operate the pump at a specific flow rate.

7. Curve examples

Curves for different models: Depending on the pump model and design, there will be multiple different equal head curves. These curves are generally marked with different line types to facilitate the distinction of performance under different models or different design conditions.

8. विशेष प्रकरणे

Special operating points may be shown in the graph to indicate the operating characteristics under specific load or system conditions, which is very important for selection in actual engineering applications.

The performance curve spectrum of the स्प्लिट केस double suction pump has the following main functions:

1. कामगिरीचे मूल्यांकन

Flow rate and head relationship: The curve can intuitively show the relationship between flow rate and head, helping users understand the operating capacity of the pump under different load conditions.

2. Efficiency analysis

Best efficiency point (BEP) identification: The best efficiency point is usually marked on the graph, and users can use this point to select the operating range of the pump to achieve the best energy efficiency and economy.

3. System matching

Load matching: Combined with the needs of the system, it allows users to find the right pump type for their specific application (such as water supply, irrigation, industrial process, etc.).

4. Pump selection

Comparison and selection: Users can compare different types of pumps through performance curves to select the pump with the best performance.

२.३. ऑपरेशनल सुरक्षा

Avoid cavitation: The curve can also assist in evaluating the net positive suction height (NPSH), help prevent cavitation and other problems, and improve the safe operation of the pump.

6. Power requirements

Power calculation: Displays the input power required at different flow rates, allowing users to perform energy budgeting and system design.

7. Commissioning and maintenance guidance

Troubleshooting: By comparing with the performance curve, operation and maintenance personnel can quickly determine whether the pump is operating normally, and whether there are any faults or efficiency reduction problems.

8. System optimization

Precise control: Through the performance curve, users can optimize the system design to ensure that the pump is in the best operating state.

निष्कर्ष

The performance curve spectrum is an indispensable tool that not only enables users to clearly understand the working characteristics of the split case double suction pump , but also provides an important basis for system design and operation optimization. By scientifically and rationally analyzing and applying these curves, users can not only select the best pump type, but also maximize energy efficiency, reduce maintenance costs, and extend the service life of the equipment during operation.