Aksiaaljõud viitab jõule, mis toimib pumba telje suunas. Seda jõudu põhjustavad tavaliselt vedeliku rõhu jaotus pumbas, tiiviku pöörlemine ja muud mehaanilised tegurid.

First, let's take a brief look at the axial force:

1. The source of axial force: The axial force mainly comes from the pressure distribution of the fluid in the pump, the rotation of the impeller and the design structure of the pump.

2. Calculation of axial force: Through the principle of fluid dynamics, the axial force can be calculated so that reasonable design and optimization can be carried out in the design stage.

3. Measurement of axial force: The use of special measuring equipment (such as axial force sensors) can monitor the axial force of the water pump in real time, helping to detect potential problems in time.

4. Balance of axial force: The use of double-suction impellers or balance discs in the design can effectively balance the axial force and reduce the impact on the pump shaft.

The impact of axial force on jagatud korpusega kahekordne imemispump süsteem:

In addition to the impact on the water pump itself, the axial force may also affect the stability and efficiency of the entire pump system, which needs to be considered comprehensively.

1. Fault analysis:

Understanding the impact of axial force helps to analyze faults and identify the causes of faults caused by unbalanced axial force, so as to take corresponding repair measures.

2. Materjali valik:

Choosing appropriate materials and surface treatment technology can improve the wear resistance and fatigue resistance of the pump and reduce the impact of axial force on the split pump.

3. Adverse effects: 

The impact of axial force on water pumps is mainly reflected in the following aspects:

4. Bearing load: Axial force will increase the load on the bearing, causing accelerated bearing wear and shortening its service life.

5. Vibration and noise: Unbalanced axial force may cause vibration and noise in the water pump, affecting the operating stability and working environment of the pump.

6. Shaft bending: Excessive axial force may cause the pump shaft to bend, which in turn affects the operating accuracy and efficiency of the pump.

7. Sealing performance: Changes in axial force may affect the degree of compression of the seal, resulting in leakage or seal failure.

8. Reduced efficiency: Improper axial force may cause uneven fluid flow, thereby reducing the overall efficiency of the water pump.

9. Failure risk: Long-term axial force imbalance may cause pump failure and increase the cost of repair and replacement.

Kontrollimeetmed

In order to avoid the impact of axial force on the normal operation of the jagatud korpusega kahekordne imemispump , the following measures can be taken:

1. Optimize the impeller design: By optimizing the shape and structure of the impeller, the axial force generated by the fluid in the impeller is reduced, thereby reducing the impact on the pump shaft.

2. Select suitable bearings: Use high-quality bearings and select suitable types (such as deep groove ball bearings, cylindrical roller bearings, etc.) according to the working conditions of the water pump to improve the load-bearing capacity and stability.

3. Regular maintenance and inspection: Regularly maintain and inspect the water pump to promptly detect and deal with problems such as bearing wear and seal failure to prevent the axial force from aggravating the impact of the pump.

4. Install a guide device: Adding a guide device to the design of the pump can help guide the direction of the axial force and reduce the direct impact on the pump shaft.

5. Control the flow of the fluid: Ensure that the fluid flows evenly, avoid axial force fluctuations caused by fluid impact, and maintain the stable operation of the pump.

Järeldus

Axial force has a significant impact on the normal operation of the split case double suction pump , which may cause a series of problems such as bearing wear, vibration, and seal failure. Therefore, it is particularly important to take effective measures to manage and control the axial force during the design and operation of the water pump. By using balancing discs, optimizing impeller design, selecting suitable bearings, and performing regular maintenance, the negative impact of axial force on the water pump can be significantly reduced, thereby improving the efficiency and reliability of the water pump. Only by fully understanding and coping with axial force can we ensure that the water pump operates stably and efficiently under various working conditions and provide reliable hydraulic support for industrial and civil fields.