- Design
- Parameters
- Material
- Testing
The split case pump is a centrifugal pump where the casing is divided into two seperate chambers, either horizontally or vertically.
The pump has been developed to offer the end user maximum efficiency, broad hydraulic coverage, low NPSHr value, and design life over a wide range of duties.
Design & Structure Features
● High efficiency, lower noise.
● Impeller is balanced with ISO 1940-1 Grade 6.3.
● Rotor parts comply with API 610 Grade 2.5.
● Bearing lubricating is grease, oil type is also available.
● Shaft seal can be either packing seal or mechanical seal, both can be interchanged, no need any modification.
● Rotation can be either Clockwise or Counter-Clockwise, both can be interchanged, no need any modification.
Performance Range
Capacity:100-30000m3/h
Head:7~220m
Efficiency: Up to 92%
Power:15~4000KW
Inlet Dia.:150~1600mm
Outlet Dia.:100~1400mm
Working Pressure:≤2.5MPa
Temperature:-20℃~+80℃
Range chart:980rpm~370rpm
Performance Range
Capacity:100-30000m3/h
Head:7~220m
Efficiency: Up to 92%
Power:15~4000KW
Inlet Dia.:150~1600mm
Outlet Dia.:100~1400mm
Working Pressure:≤2.5MPa
Temperature:-20℃~+80℃
Range chart:980rpm~370rpm
Pump Parts | For Clear Water | For Sewage | For Seawater |
Casing | Cast Iron | Ductile Iron | S.S / Super Dulex |
Impeller | Cast Iron | Cast Steel | S.S / Super Dulex / Tin Bronze |
Shaft | Steel | Steel | S.S / Super Dulex |
Shaft Sleeve | Steel | Steel | S.S / Super Dulex |
Wear Ring | Cast Iron | Cast Steel | S.S / Super Dulex / Tin Bronze |
Remark | Final material depends on the liquid condition or the client's request. |
Our testing center have beenauthorized a national second grade certificate of accuracy, and all the equipments were built up according to the international standard like ISO,DIN, and the lab could provide performance testing for varied kinds of pump , motor power up to 2800KW, suction diameter up to 2500mm.
VIDEOS
DOWNLOAD CENTER
- Brochure
- Range Chart
- Curve in 50HZ
- Dimension Drawing